HTG2.club

การเปลี่ยนหัวอ่าน CD-ROM PLAYER ที่ไม่อ่านแผ่น

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

ออฟไลน์ สุดเหนือ

  • ****
    • กระทู้: 400
    • เพศ:ชาย
มีใครพอแนะนำที่ซื้อหัวอ่าน samsung dvd R135 บ้างครับ ของผมมันไม่อ่านสักแผ่น ขึ้น load สักพัก ดีดแผ่นออกหมดเลย ทั้ง mp3 audio dvd
จงใช้ความเข้าใจ..มากกว่าความพอใจ


ออฟไลน์ dekdek

  • Super Star.
  • **
    • กระทู้: 2,261
ของผมได้ซากเครื่องเล่น SONY จากคลองถมมา 200 บาทถ้วน เครื่องไม่อ่านแผ่น  ช่วงนั้นขี้เกียจเลยให้ อม...ตีราคาดูช่างเค้าบอก  2000  กว่า ไม่มีอะไหล่ ซ่อมไม่คุ้ม
 :o เลยถือกลับมาซ่อมเองดีกว่า สรุป ซื้อหัว Kss-240a (ถ้าจำไม่ผิด) 400  ก่าๆ  เปลี่ยนแล้วเครื่องอ่านแผ่น  แต่ไม่มีเสียง   :D  ลองไล่สายแพพบสายแพขาดหัก...ทำไงดีสายแพรุ่นนี้คงหายาก :D  เลยตัดเอาสายแพจากที่อื่นมาโมเอา นับเส้นและตัดให้ตรงจำนวน  ...เสียงยังไม่มาอีก  คราวนี้ใช้วิชามารครับ เอาไขควงเคาะบน IC เคาะไปไม่กี่ตัวก็เจอแล้ว  สรุป IC หลอม/ล่อน มองด้วยตาปล่าวไม่เห็น  จัดการบัดกรีย้ำซะ  ที่นี้เรียบร้อยครับ  :clap หมดงบไปเกือบ 700
แต่ได้เครื่องเล่น ดี ๆ  มาตัวครับ

นับถือ  ๆ  คราวหน้าเอา ต้องเอาไขควงไล่เคาะ Ic ก่อนเลย  ;D
ข้อมูลส่วนบุคคล

http://www.htg2.net/index.php?topic=60285.0


ออฟไลน์ san

  • *****
    • กระทู้: 542
รบกวนสอบถามครับ ตะกั่วที่ว่ามันอยู่บริเวณไหนครับ เผื่อวันหน้ามีโอกาศจะได้จี้ถูกจุด


CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
ปรับจากตำแหน่งเดิมที่เขาแต้มสีไว้หรือครับ ผมจะได้ลองปรับบ้างเพราะเปลี่ยนแล้วก็ไม่อ่านเหมือนกันครับ  :black_eye

   คุณ  Aufklarung....ตอนเปลื่ยนหัว cd....จี้หัวแร้งละลายตะกั่ว.....ที่เค้าแต้มตะกั่ว....ช๊อตกัน.....บน pcb ของหัว cd....หรือยังครับอ่ะ  :)


ออฟไลน์ sign

  • ***
    • กระทู้: 219
    • เพศ:ชาย
  • เด็กน้อย DIY
ของผมได้ซากเครื่องเล่น SONY จากคลองถมมา 200 บาทถ้วน เครื่องไม่อ่านแผ่น  ช่วงนั้นขี้เกียจเลยให้ อม...ตีราคาดูช่างเค้าบอก  2000  กว่า ไม่มีอะไหล่ ซ่อมไม่คุ้ม
 :o เลยถือกลับมาซ่อมเองดีกว่า สรุป ซื้อหัว Kss-240a (ถ้าจำไม่ผิด) 400  ก่าๆ  เปลี่ยนแล้วเครื่องอ่านแผ่น  แต่ไม่มีเสียง   :D  ลองไล่สายแพพบสายแพขาดหัก...ทำไงดีสายแพรุ่นนี้คงหายาก :D  เลยตัดเอาสายแพจากที่อื่นมาโมเอา นับเส้นและตัดให้ตรงจำนวน  ...เสียงยังไม่มาอีก  คราวนี้ใช้วิชามารครับ เอาไขควงเคาะบน IC เคาะไปไม่กี่ตัวก็เจอแล้ว  สรุป IC หลอม/ล่อน มองด้วยตาปล่าวไม่เห็น  จัดการบัดกรีย้ำซะ  ที่นี้เรียบร้อยครับ  :clap หมดงบไปเกือบ 700
แต่ได้เครื่องเล่น ดี ๆ  มาตัวครับ


ออฟไลน์ sorradej

  • ****
    • กระทู้: 420
    • เพศ:ชาย
  • ความสุขคือ?
    • TAC

โชคจริงๆครับ วันนี้ไปร้านอมรมา คนที่รับเครื่องเห็นเครื่องเรายังอึ้งเลยอ่ะครับ

มองเครื่องเราแล้วถามว่าอะไรครับ เครื่องนี้เสียบเข้าคอมพิวเตอร์เลยใช่ไหม กรรมจริงๆ

แล้วหยิบเครื่องผมหายเข้าไปสักสองนาที เดินออกมาบอกว่าไม่มีอะไหล่ครับพี่  :nono



ออฟไลน์ dekdek

  • Super Star.
  • **
    • กระทู้: 2,261
NEC ตัวนี้ ถ้าหัวอ่านหาได้ เป็นผมซ่อมไว้ใช้ครับ + DAC คุ้มค่าสักตัวน่าเล่นครับ   O0
ดูโครงสร้างสุดยอด แถมลักษณะการขับเคลื่อนหัวอ่าน
ผมว่าคล้ายพวกเครื่อง onkyo รุ่นใหญ่ ๆ เลยครับ

จากที่รื้อ CDrom มาหลาย ๆ รุ่น พวกเก่า ๆ 2-4x มี brand จะมีโครงสร้างค่อนข้างดี แต่เรื่องหัวก็แล้วแต่โชค  :)

ข้อมูลส่วนบุคคล

http://www.htg2.net/index.php?topic=60285.0


ออฟไลน์ art

  • Superstar..
  • ***
    • กระทู้: 3,651
    • เพศ:ชาย
  • อยากกลับมาเล่นหลอด...อีกครั้งแล้ว ^^
CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
ปรับจากตำแหน่งเดิมที่เขาแต้มสีไว้หรือครับ ผมจะได้ลองปรับบ้างเพราะเปลี่ยนแล้วก็ไม่อ่านเหมือนกันครับ  :black_eye

   คุณ  Aufklarung....ตอนเปลื่ยนหัว cd....จี้หัวแร้งละลายตะกั่ว.....ที่เค้าแต้มตะกั่ว....ช๊อตกัน.....บน pcb ของหัว cd....หรือยังครับอ่ะ  :)
เรียบร้อยแล้วครับ แต่ก็ยังนิ่งๆ ใส่เข้าไปมีแต่หัวอ่านเลื่อนแต่แกนกลางที่หมุนแผ่นนิ่งเลยไม่หมุน ปกติหรือเปล่าครับ  ???

สวิทต์กลไก....อยู่ในตำแหน่งของมัน....หรือป่าวครับ...ผมเคยประกอบกลับไม่ดี....มันเลยไม่หมุนอ่ะครับ  ;D
**ไร้สาระโดยสิ้นเชิง.....บันเทิงลูกเดียว**

ติดต่อผมที่นี่ครับ ^^

http://www.htg2.net/index.php?topic=22903.0


ออฟไลน์ Aufklarung

  • Superstar..
  • ***
    • กระทู้: 3,052
    • เพศ:ชาย
  • das Heimwerken.
CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
ปรับจากตำแหน่งเดิมที่เขาแต้มสีไว้หรือครับ ผมจะได้ลองปรับบ้างเพราะเปลี่ยนแล้วก็ไม่อ่านเหมือนกันครับ  :black_eye

   คุณ  Aufklarung....ตอนเปลื่ยนหัว cd....จี้หัวแร้งละลายตะกั่ว.....ที่เค้าแต้มตะกั่ว....ช๊อตกัน.....บน pcb ของหัว cd....หรือยังครับอ่ะ  :)
เรียบร้อยแล้วครับ แต่ก็ยังนิ่งๆ ใส่เข้าไปมีแต่หัวอ่านเลื่อนแต่แกนกลางที่หมุนแผ่นนิ่งเลยไม่หมุน ปกติหรือเปล่าครับ  ???
die Aufklärung คือ รู้แจ้ง กระจ่างแจ้ง ให้ความสว่าง (enlightenment) ครับ
อ่านว่า Auf = เอาฟ์ klär  = แคลรร และ ung = อุง (บางทีออกเสียงคล้ายๆ วุง)  เอาฟ์แคล์รอุง ครับ
และเป็นชาว :D ชมรมคนรัก หลอดหัวจุก :D ด้วย
ข้อมูลส่วนตัวครับ http://www.htg2.net/index.php?topic=30585.0


ออฟไลน์ sorradej

  • ****
    • กระทู้: 420
    • เพศ:ชาย
  • ความสุขคือ?
    • TAC
เกิดจากอ่านนี่มาอ่ะครับแล้วพอดีเรามีเอง

http://www.positive-feedback.com/Issue3/cdrom.htm

Fun With Used Equipment, or How to Put Together a $3000 Audiophile CD Player for $555!
by Ed Morawski

My introduction into the audiophile world was a Muse 2 DAC. I once laughed at the thought of adding a separate D-to-A converter, believing that the one built into my CD player was surely fine. I laughed until I heard the Muse 2. What an unbelievable improvement! I can still remember all the detail revealed for the first time. With its 20x8 bit oversampling, the Muse was cutting edge back in 1993, and holds its own today because we still use the Redbook CD format. The Muse also has an overbuilt power supply and topnotch construction, but the best part is that this unit, that once sold for $2000, can now be had for as little as $500 on the used market.

What to pair it with for a transport? I have a surprising suggestion. Look on eBay in the computer section for an NEC MultiSpin 6Xe CD-Rom drive. The "e" stands for "external," and means the Model CDR-602 is a standalone CD-Rom drive with its own power supply and, more importantly, a S/PDIF digital output. These CD-Rom drives are usually available at prices ranging from $2.95 to $12.95. I just bought two for $2.95 plus shipping! They do require a caddy, so make sure the one you buy includes one. (A caddy is a plastic and metal holder for the CD which then gets inserted into the CD-Rom drive.) Interestingly, many of the top CD makers now use computer CD-Rom drives in their best players. Why? Because they are rugged, dependable, and can read any type of CD, CD-R or CD-RW. The drawback? No remote control. You have to get up to change tracks or, of course, you could just hit "play" and let it go through all the tracks. While you're on eBay, pick up a Canare Digi-flex Gold Digital cable, which is readily available for $25 to $40 and rivals any of the higher-priced cables.
So, hopefully you've spent $500 for the Muse 2 (or already have a DAC you like), $15 or so for a transport, and $40 for a top-quality cable. Now, hook them all together and run the output of the Muse into your system and prepare to be blown away! Just for grins, I bought exactly the above system and compared it to my reference Resolution Audio Opus 21 ($3000). It was difficult to tell them apart! If anything, the NEC/Muse combo had better (meaning tighter and more well-defined) bass than my reference. Its upper end detail was comparable, but perhaps a little more harsh. At first, I felt the Opus 21 had more air in the top end, but I knew I would have to spend more extensive listening time with the combo.

Only after many hours playing CDs did I feel ready to render judgment. Four CDs were primarily used for listening: Keiko Matsui's Deep Blue, Norah Jones’ Come Away With Me, Diana Krall's Look of Love, and finally Lara St John's Bach Concertos. Although louder in volume on the Opus 21, bass seemed better defined on the Muse/NEC, after careful level matching of the components. Both setups revealed cymbals that sound like cymbals and clearly defined brushes—always a tough trick for a CD player—but I had to give the edge to the Opus 21. There was slightly more air around the strings and cymbals. Vocals were smooth and silky on both machines.

As I spent more time with the Muse/NEC combo, I began to realize it had a unique sound—not at all unpleasant but difficult to put my finger on. While the Resolution Audio played all music with superior results, the Muse/NEC seemed to depend more on CD quality. I must attribute this to the upsampling on the Opus 21, which is totally lacking on the Muse. Nevertheless, on certain recordings the Muse sounded more precise and detailed than the same CD on the Opus 21. Could this be the result of the caddy on the NEC? As someone very familiar with computers, I know the caddy system is much more precise and stable than drawer-type CD transports. The caddy also has another big advantage. When you insert it into the CD-Rom drive, a narrow slit is automatically opened in the bottom. This exposes only a small portion of the CD, and must limit "laser scatter" considerably—sort of like using a black pen and blacking out the clear parts of the CD, except the caddy "blacks out" the whole CD except the portion the laser is reading. Whatever is happening, this is good stuff. The more I listen, the more I like it. In my final session before writing this, I connected the NEC's digital output to my Opus 21’s digital input. Wow again! Vocals were especially full bodied, while the highs seemed more delicate and well formed. Again, I must attribute this to the NEC's superior reading and caddy transport system.

What have you got to lose? It's rare that something this good and this inexpensive comes along. Grab a NEC CDR-602 while they are still out there, and experiment.

สงสัยอ่านมากไปหน่อยเลยอยากมาลองทำหน่ะครับ
« แก้ไขครั้งสุดท้าย: 27 กันยายน, 2008, 04:07:58 pm โดย sorradej »


ออฟไลน์ art

  • Superstar..
  • ***
    • กระทู้: 3,651
    • เพศ:ชาย
  • อยากกลับมาเล่นหลอด...อีกครั้งแล้ว ^^
CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
ปรับจากตำแหน่งเดิมที่เขาแต้มสีไว้หรือครับ ผมจะได้ลองปรับบ้างเพราะเปลี่ยนแล้วก็ไม่อ่านเหมือนกันครับ  :black_eye

   คุณ  Aufklarung....ตอนเปลื่ยนหัว cd....จี้หัวแร้งละลายตะกั่ว.....ที่เค้าแต้มตะกั่ว....ช๊อตกัน.....บน pcb ของหัว cd....หรือยังครับอ่ะ  :)
**ไร้สาระโดยสิ้นเชิง.....บันเทิงลูกเดียว**

ติดต่อผมที่นี่ครับ ^^

http://www.htg2.net/index.php?topic=22903.0


ออฟไลน์ Aufklarung

  • Superstar..
  • ***
    • กระทู้: 3,052
    • เพศ:ชาย
  • das Heimwerken.
CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
ปรับจากตำแหน่งเดิมที่เขาแต้มสีไว้หรือครับ ผมจะได้ลองปรับบ้างเพราะเปลี่ยนแล้วก็ไม่อ่านเหมือนกันครับ  :black_eye
die Aufklärung คือ รู้แจ้ง กระจ่างแจ้ง ให้ความสว่าง (enlightenment) ครับ
อ่านว่า Auf = เอาฟ์ klär  = แคลรร และ ung = อุง (บางทีออกเสียงคล้ายๆ วุง)  เอาฟ์แคล์รอุง ครับ
และเป็นชาว :D ชมรมคนรัก หลอดหัวจุก :D ด้วย
ข้อมูลส่วนตัวครับ http://www.htg2.net/index.php?topic=30585.0


ออฟไลน์ Eak-tubeamp

  • วันนี้ไม่เริ่ม ก็ไม่มีวันสำเร็จ
  • Superstar...
  • ****
    • กระทู้: 4,849
    • เพศ:ชาย
  • ....ด้วยใจรัก....
ถ้าเกิดทำได้มันก็เป็นภูมิความรู้ เหมือนคุณ tryman ว่าแหล่ะครับ ซื้อใหม่ดีกว่า(ผมก็นึกว่าเป็นเครื่องเล่น CD ไม่อ่านให้ละเอียด)
tel 083-3887864


ข้อมูลส่วนตัว  http://www.htg2.net/index.php?topic=44962.0


ออฟไลน์ Tryman

  • *****
    • กระทู้: 787
ซื้อหัวอ่านมาเปลี้ยนกับซื้อ cd rom ใหม่ ราคาไม่น่าจะต่างกันมากครับ
ข้อมูลติดต่อ และโอนเงิน
http://www.htg2.net/index.php?topic=35972.0


ออฟไลน์ Eak-tubeamp

  • วันนี้ไม่เริ่ม ก็ไม่มีวันสำเร็จ
  • Superstar...
  • ****
    • กระทู้: 4,849
    • เพศ:ชาย
  • ....ด้วยใจรัก....
CD ผมมีอาการไม่อ่านแผ่นเหมือนกัน ไม่อยากพาไปร้านซ่อม เปลี่ยนเองเลยครับ พอดีน้องที่ทำงานมีหัวอ่าน SONY เปลี่ยนเสร็จมันไม่อ่านแผ่นเลยปรับค่า R ที่หัวอ่านนิดนึง แล้วลองใส่แผ่นดูปรากฎว่าอ่านครับ ใช้ได้มาถึงวันนี้ปีกว่าแล้ว (ตัวเครื่องเป็นของฟิลิปส์)
tel 083-3887864


ข้อมูลส่วนตัว  http://www.htg2.net/index.php?topic=44962.0



ออฟไลน์ Aufklarung

  • Superstar..
  • ***
    • กระทู้: 3,052
    • เพศ:ชาย
  • das Heimwerken.
ขอถามแจมไปนิดนะครับ  :bye1

เคยลองเปลี่ยนหัวเครื่อง CD เก่าๆของผม เปลี่ยนเสร็จแล้วก็ยังไม่อ่านครับ หัวก็เลื่อนเหมือนสะดุดนิดๆ สงสัยทำผิด แต่การที่เปลี่ยนหัวเสร็จแล้ว
พอใส่แผ่นเข้าไปแล้วแผ่นไม่หมุนนี่ปกติหรือเปล่าครับ  :bye1
die Aufklärung คือ รู้แจ้ง กระจ่างแจ้ง ให้ความสว่าง (enlightenment) ครับ
อ่านว่า Auf = เอาฟ์ klär  = แคลรร และ ung = อุง (บางทีออกเสียงคล้ายๆ วุง)  เอาฟ์แคล์รอุง ครับ
และเป็นชาว :D ชมรมคนรัก หลอดหัวจุก :D ด้วย
ข้อมูลส่วนตัวครับ http://www.htg2.net/index.php?topic=30585.0


ออฟไลน์ SOUNDTUBE

  • Super Star
  • *
    • กระทู้: 1,451
    • เพศ:ชาย
     http://www.thaidiyaudio.net/index.php/topic,921.msg12139.html#msg12139    ลองเทียบเคียงกันดูนะครับ อาจมีท่านที่เคยผ่านงานมาแล้ว อาจอธิบายได้ ส่วนผมไม่เป็นเหมือนกัน :secret
ข้อมูลส่วนตัว http://www.htg2.net/index.php?topic=23096.0



ออฟไลน์ sorradej

  • ****
    • กระทู้: 420
    • เพศ:ชาย
  • ความสุขคือ?
    • TAC
หัวอ่าน CD-ROM PLAYER ไม่อ่านแผ่น

NEC MultiSpin 6Xe CDR-602 ปัจจุุบันเริ่มไม่ยอมอ่านแผ่น อ่านเพียงบางแผ่นซึ่งน้อยมาก

คาดเดาเอาเองว่าค่าหัวอ่านบวกค่าทำ หากส่งที่อมรน่าจะราวๆ 350-500 บาท

หากผมต้องการเปลี่ยนหัวอ่าน ดูได้ตรงส่วนไหนของหัวอ่านครับ

หรือหากต้องการปรับหัวอ่าน ต้องปรับที่ไหน

รบกวนแนะนำด้วยครับ ผมอ่านจากสติกเกอร์ที่แปะไว้ พิมพ์ว่า SPU3024 42Q5XGA
« แก้ไขครั้งสุดท้าย: 27 กันยายน, 2008, 04:10:15 pm โดย sorradej »