HTG2.club
Home Theater Guide webboard => มุม โฮมเธียเตอร์ (HT) => ข้อความที่เริ่มโดย: กัมปนาท KK ที่ 12 กันยายน, 2007, 02:06:05 pm
-
:secret ทาง Clef Audio ได้เป็น ตัวแทนรับทำ ขบวนการ Cryogenic ให้กับ นักเล่นเครื่องเสียงครับ
อัตราค่าบริการ คิดตาม ขนาด และ น้ำหนัก ประกอบกันครับ
เช่น สายacไฟคิดเมตร ละ สายเส้นเล็ก 400-/ เส้นใหญ่ 550-/เมตร
ปลั๊กผนังเล็ก 15A 100-
ใหญ่ 20A 120-
หัวตัวผู้ Connecter 100-
หัวตัวเมีย IEC Connecter 100-
Fuse 30-
แผ่นCDและ DVD 50- / 1แผ่น , ราคายังไม่รวม vat7%
กรณี cd เก่านี้จะผ่าน เครื่อง demagnatic ให้ด้วยครับ :yahoo
(http://www.furutech.com/items/DSCF3325.jpg)
รอบนี้จะทำ Cryoginic วันจันทร์ 17/9/50 ผู้ประสงค์จะทำต้องส่งของอย่างช้าวัน เสาร์15 นี้ที่ office Clef
tel 02-9325981
-
รูปตู้ CRYOGENIC
(http://www.cryogenicsinternational.com/CI-System-web2.jpg)
Do you like music?
Do you like it to sound as lifelike as possible?
Would you like to use the most cost effective method to take your system to a higher level?
Our highly precise, ultra-cold process will improve the sound and quality of all your audio systems' components, interconnects, power cords, outlets, tubes, CDs, DVDs, and LPs. Listeners report sonic improvement, more resolution and a more natural ease greater than received by using more expensive equipment and cables.
You already have premium equipment. Why not make it perform at its zenith? Audiophiles receive the finest service with no shortcuts at the best value with Cryogenics International!
Problem:
It is well known that disparate materials used in connectors, solder joints, pc board circuitry as well as residual stresses and gaps within the lattice structure of materials all serve to degrade and/or hamper sound reproduction. These imperfections are caused by the un-even cooling and shrinkage of the liquid or molten material into a solid. All these imperfections cause noise. Electronic noise often contributes to a lack of focus, detail and resolution in audio and lack of sharpness and color definition in video.
Solution:
Reduce or eliminate the inherent stresses and other imperfections which cause noise, through precise deep cryogenic processing. Our process removes built-in stress, reforms microstructure and uniforms or blends solder junctions and connections to improve the free flow of current. The result is greater transparency and less noise.
Assurances:
Permanent, beneficial change in molecular structure of materials, cable, pathways and dielectric.
Proven processing profiles, with minimums of 8 hours descend to temperatures below -315°F, "soak" or hold below -315°F for 24 hours, and ascend to ambient of at least 10 hours. Some profiles can take upwards of 3 days to complete. These profiles have been proven to be effective by university research and years of positive applications by leaders in industry, like manufacturing companies and national gov't research facilities. They don't accept compromise and you shouldn't either. We do not take shortcuts!
What this means to you is:
Your system will exhibit superior transparency, gain speed and be much more dynamic. These qualities elude untreated cables, components and recorded media. Our deep cryogenic process provides music that is easier to listen to - very relaxed, like a transcendental state.
Vivid color reproduction for video and stunning sound for audio is reality with our controlled deep cryogenics.
What our process does:
Metals and plastics respond very well to our precise deep cryogenic process. The reasons are as follows. During the cooling or solidification phase of the manufacturing process, molecules are trapped in a haphazard pattern. This random placement causes obstacles for electrons and/or light when encountered. This interference can cause noise, slow down electron flow and will negatively affect the quality of the music being played. At very cold temperatures (below -315°F), the molecules will align in a more uniform, compact structure through the removal of kinetic energy. When the material is returned to ambient temperature, this new uniform, compact pattern is maintained. This process makes a permanent change and the benefits do not deteriorate over time or upon return to operating temperature.
Other benefits:
Solder zones are inherently imperfect and full of stress. Our process will uniform these junctions, improving electron flow and sound quality.
Completely assembled cables, components, etc. are processed with fantastic results.
Optical discs i.e. CDs, DVDs, and SACDs are inherently full of stress from the cooling of the polycarbonate from the injection mold process. These "clouds" cause birefringence, which affects sound quality. Our cryogenic process "clarifies" and "aligns" the polycarbonate so the laser can read the "pits" and "lands" accurately without refraction. The result is truer retrieval of the digital music.
Vacuum tubes are dramatically improved by the reduction of residual stress and uniformity of structure. Residual stress increases the resonance of a vacuum tube and a vacuum tube exhibits much resonance, so it is very beneficial to use this process to reduce resonance thereby improving quality.
Reduce noise, improve fidelity, sonic clarity, and depth with our industry proven, precise deep cryogenic process.
A great article about our equipment, process and benefits.
Testimonials:
Charles,
Thanks much:
I have been using Cryogenics International for the last 3 months and his service is impeccable - lightning fast turnaround time and great communications. And especially at the price he charge, I don't think you can find anything better!!
As for the result after cryo my Power Cables & Interconnect, I was amazed - you get a much smoother sound, great transparency and musicality to boot. My system now is really focus, each note is well defined and I swear the background noise is much quieter. I could not be more happy for the small amount of money spent with such huge difference - much better than any single component upgrade I did....
Regards,
Khoi Tran
-
คุณกัมช่วงนี้มีของมาล่อเยอะจัง
8)
-
มีทีเด็ดมายั่วกันอีกแล้ว..คุณกัมปนาท
0)]
-
ผมก็มีปลั๊กผนังผ่านการ CRYOGENIC แบบ hand made โดย Prof. O. DD. :clap อยู่ 3 ตัว เก็บอยู่ยังไม่ได้แกะออกจากกล่องไปรณีย์เลยอ่ะ :D
-
เอาสายกีต้าร์ไปลองทำก็น่าสนแฮะ :headphone
-
เอาสายกีต้าร์ไปลองทำก็น่าสนแฮะ :headphone
พวกเครืองสายเหมาะมากสายจะกังวาลดีกว่าเดิมแน่
-
อ่านหัวเรื่องตอนแรกตกใจ :-Xนึกว่าคุณกัมรับทำ cryogenic แช่แข็งคน ;D
-
ติดคุกสิครับท่าน johnny_kk
ตอนนี้ใกล้เต็มแล้วครับ รีบหน่อยครับ
เฮีย ปัก เอาหลอดมา ทำ 100 หลอด สายไฟอีก 6เส้น สายสัญญาณ อีก 6 เส้น หัว nicoon12หัว ครับ แถมcd 2แผ่น
และท่าน พลชาย นำเอาสาย Anticable มาทำ 2 เส้น หัว wattgateอีก 2ชุด
-
จากที่อ่านคร่าวนะครับว่าการทำ cryo วึ่งต้องผ่านกระบวนการที่ใช้ความเย็นจัดเป็นเวลานานขนาดนั้น จะส่งผลกับอุปกรณ์ประกอบเช่น ฉนวนของสายไฟ หรือ case ของ connector ให้เสียหายรึเปล่าครับ
czardas
-
เท่าที่ทำกันไม่มีความเสียหายครับ กับพวก ฉนวนของสายไฟ case ของ connector ส่วนใหญ่เป็น polymer หรือพลาสติก ไม่มีปัญหาครับ
-
plannet laser ส่งแผ่น cd 4 แผ่นใหม่เพื่อ test ทำกลับไม่ทำ Cryogenic ดีต่างกันอย่างไร Y] ไม่ลองไม่รู้
น้อง Ice ส่งสายไฟ เข้าทำด้วยครับ
ส่วนตัวผม เอาหม้อแปลง R core ทำ Cryogenic มี 2 ตัวแล้วจะเอามาเทียบกันครับท่าน
มี ปลั๊ก cooper 100 ตัว และ วงจร power Bridge 5 ชุดเพื่อหาความแตกต่าง
และสุดท้าย revolution Y]
-
ถ้าจะส่งหลอด พี่กัมคิดราคายังงัยครับ และจะรับของได้วันใหนครับสำหรับการทำครั้งนี้
---ที่ถามนี่ก็เพราะว่า ถ้าส่งทำแล้วใจร้อนแน่ๆ นับวันลองของแน่ๆครับ---
-
หลอดละ 250- ครับต่อหลอด เข้าตู้วันจันทร์ น่าจะออกวัน พฤหัส เย็น
ศุกร์ มารับได้เลย :yahoo
-
ขอความรู้จากพี่ๆ ด้วยครับ ว่าการทำCryogenic คืออะไร (พอดีอ่านภาษาอังกฤษแล้วยังไม่ค่อยเข้าใจ) ขอบคุณครับ
-
พี่กัมปครับ เคยมีคนเอาปรีแอมป์หลอดทั้งเครื่องไปเข้าตู้เลยไหมครับ ไม่ได้กวนนะครับ อยากรู้จริงๆ สายไฟทั้งเส้นยังเอาเข้าได้เลย คิดว่าถ้าเป็นพาวเวอร์คงไม่ไหว ใหญ่เกิน
ข้อสอง cryo มีอายุไหมครับ ว่าทำแล้วต้องเอาเข้าอีกทุกกี่ปี กี่เดือน อะไรทำนองนี้
ข้อสาม สายไฟfim gold ผมจะถอดออกจากปลั๊ก แล้วหิ้วไปทั้งเส้นตามสภาพที่ดัดไว้อย่างนั้น แล้วให้พี่เอาเข้าตู้cryo แบบนั้นเลย ห้ามดัดอีก ได้ไหมครับ ตอนกลับไปเสียบที่เดิมจะได้ไม่ต้องดัดอีก เพราะสายยี่ห้อนี้ดัดแล้วเสียงแย่ลงทุกครั้งที่ทำการดัดจริงๆ
ขอบคุณมากครับ
-
ฝรั่ง เขาเอาเข้าทั้งตัวครับแต่ผมว่ามันกินพื้นที่ แพงแน่ๆ
ข้อสอง cryo มีอายุไหมครับ ว่าทำแล้วต้องเอาเข้าอีกทุกกี่ปี กี่เดือน อะไรทำนองนี้
ไม่มีครับทำครั้งเดียวจงคงอยู่ได้ตลอดการใช้งาน
ข้อสาม สายไฟfim gold ห้ามดัดอีก
คงเข้าตู้ยากๆ นะครับขอดูก่อนว่ามันจะลงตู้ได้หรือเปล่าครับ
-
ขอความรู้จากพี่ๆ ด้วยครับ ว่าการทำCryogenic คืออะไร (พอดีอ่านภาษาอังกฤษแล้วยังไม่ค่อยเข้าใจ) ขอบคุณครับ
ขอตอบดังนี้ ถ้าวิธีที่จะทำให้วัสดุ มีคุณภาพมากขึ้นอาจใช้หลอมด้วยความร้อนและลดอุณหภูมิ ลงเร็วทันทีจะเกิดความเครียดในโลหะนั้นขณะเคลื่อนย้าย
แต่ในระบบ Cryogenic เป็นการหลอมรวมโลหะด้วยความเย็นที่เอาชนะแรงยึดเกาะเดิมของโมเลกุลทำให้โมเลกุลเข้าใกล้กันเพิ่มbondยึดเกาะของ โลหะ ลดระยะห่างระหว่างผลึกลดความต้านทานในสายไฟ ขบวนการเกินขึ้นในตู้เดียวไม่ได้เคลื่อนโลหะไปมาขณะ setตัว จึงไม่มีความเครียดแต่อย่าใด ดังนี้ผลโดยรวมจะเพิ่มคุณสมบัติที่ควรเป็นในโลหะนั้นๆให้สมบูรณ์มากขึ้น
-
ขอความรู้จากพี่ๆ ด้วยครับ ว่าการทำCryogenic คืออะไร (พอดีอ่านภาษาอังกฤษแล้วยังไม่ค่อยเข้าใจ) ขอบคุณครับ
ขอตอบดังนี้ ถ้าวิธีที่จะทำให้วัสดุ มีคุณภาพมากขึ้นอาจใช้หลอมด้วยความร้อนและลดอุณหภูมิ ลงเร็วทันทีจะเกิดความเครียดในโลหะนั้นขณะเคลื่อนย้าย
แต่ในระบบ Cryogenic เป็นการหลอมรวมโลหะด้วยความเย็นที่เอาชนะแรงยึดเกาะเดิมของโมเลกุลทำให้โมเลกุลเข้าใกล้กันเพิ่มbondยึดเกาะของ โลหะ ลดระยะห่างระหว่างผลึกลดความต้านทานในสายไฟ ขบวนการเกินขึ้นในตู้เดียวไม่ได้เคลื่อนโลหะไปมาขณะ setตัว จึงไม่มีความเครียดแต่อย่าใด ดังนี้ผลโดยรวมจะเพิ่มคุณสมบัติที่ควรเป็นในโลหะนั้นๆให้สมบูรณ์มากขึ้น
ขอบคุณมากครับ
-
คาโย้ แล้ว เสียงดีขึ้น ยังไงครับ ...
แล้วต้องคาโย้ ทุกชิ้นหรือเปล่า :help
-
อ่านหัวเรื่องตอนแรกตกใจ :-Xนึกว่าคุณกัมรับทำ cryogenic แช่แข็งคน ;D
ไม่ต้องตกใจครับ เมื่อคืนดูทีวี สโมสร โบลตัน แห่งพรีเมียร์ชิพ มีการ cryo นักเตะเพื่อรักษาอาการบาดเจ็บแล้วครับ :secret
-
อ่านหัวเรื่องตอนแรกตกใจ :-Xนึกว่าคุณกัมรับทำ cryogenic แช่แข็งคน ;D
ไม่ต้องตกใจครับ เมื่อคืนดูทีวี สโมสร โบลตัน แห่งพรีเมียร์ชิพ มีการ cryo นักเตะเพื่อรักษาอาการบาดเจ็บแล้วครับ :secret
งี้ใครลองเอาหูไปแช่ดูซิครับ :P
-
งี้ใครลองเอาหูไปแช่ดูซิครับ :P
คุณหมีก็ลองก่อนเลยซิ อุปกรณ์มีพร้อมอยู่แล้ว ไม่ต้องรอเข้าเครื่อง ;D
-
สงสัยนิดนึงครับเกี่ยวกับ Cryogenic ที่บอกว่าอุณหภูมิ -315 องศาF ซึ่งคิดเป็นองศา C ก็ประมาณ -193 ซึ่งพอๆ กับอุณหภูมิของไนโตรเจนเหลว ผมเคยเห็นเขาเอาท่อยางแบบที่ใส่คนไข้แหย่ลงไป ผล แข็งโป๊กเลย เคาะแล้วแตกแบบกระจกเลย แล้วอุปกรณ์ของสายต่างๆ ไม่เป็นแบบนี้หรือครับ
น
-
พวกถุงน่องผู้หญิง ยังผ่านขบวนการ cryogenic เลยครับแถมยืดได้มากขึ้น 30%
สาย ดีๆ เช่น furutech Hamonictech Shunyata Acmy -audio Clef-audio ;D ;Dบริษัทคุ้นๆ อีกมากมายที่ใช้ prrocess นี้
ตัวอย่าง
Shunyata Anaconda Helix Alpha 1.8 m.
[XX18AnaconAl] 84,000.00Baht 13 conductors
8 gauge aggregate
Cryogenic CDA-101 pure copper
Shunyata Venom AC & IEC
- Silver plated, cryogenically treated
Power Reference III-N1(1.8m)
High End performance Power Cable for Audio Equipment
All metallic parts are treated with the
*FURUTECH α(Alpha) Process (Super Cryogenic & Demagnetize Treatment)
(http://www.furutech.com/items/Power%20Ref.III-N1%20%20B1.jpg)
-
-ขอบคุณ ที่ สนับสนุนโครงการ cryogenically treated กันครับตู้ เต็มแล้วครับ c) c)
ใครที่ยังไม่ ตัดสินใจต้องรอ เดือนหน้าแล้วครับท่าน
-
อ่านหัวเรื่องตอนแรกตกใจ :-Xนึกว่าคุณกัมรับทำ cryogenic แช่แข็งคน ;D
ไม่ต้องตกใจครับ เมื่อคืนดูทีวี สโมสร โบลตัน แห่งพรีเมียร์ชิพ มีการ cryo นักเตะเพื่อรักษาอาการบาดเจ็บแล้วครับ :secret
นึกถึง ฮันโซโล อ่ะ :-X
-
คุณ golf ไม่มีอะไรจะแช่หรือท่าน Y]มาลองดูสักชิ้นจะติดใจ
-
พี่กัมครับ ไม่ทราบว่าของล็อตแรกที่นำไปเข้าตู้นี่จะได้ ยลโฉมกันเมื่อไรครับ ;) ;) ;)
-
น่าจะ ศุกร์ นี้ครับท่าน
-
ทำทีกี่วันครับ
แล้วผมจะใช้อะไรล่ะเนี่ย
-
สงสัยนิดนึงครับเกี่ยวกับ Cryogenic ที่บอกว่าอุณหภูมิ -315 องศาF ซึ่งคิดเป็นองศา C ก็ประมาณ -193 ซึ่งพอๆ กับอุณหภูมิของไนโตรเจนเหลว ผมเคยเห็นเขาเอาท่อยางแบบที่ใส่คนไข้แหย่ลงไป ผล แข็งโป๊กเลย เคาะแล้วแตกแบบกระจกเลย แล้วอุปกรณ์ของสายต่างๆ ไม่เป็นแบบนี้หรือครับ
น
ถูกต้องแล้วครับ ถ้าหยิบสายขึ้นมาเคาะตอนอุณหภูมิเย็นจัดขนาดนั้น ย่อมแตกเพล้งแน่นอนครับ แต่ที่ทำกันนี่เขาต้องเพิ่มอุณหภูมิขึ้นมาให้อยู่ในระดับปกติก่อนค่อยเปิดเครื่องออกมาใช่ไหมครับพี่กัมป์
เหมือนน้ำน่ะครับ ถ้าแช่ให้เย็นจัดจะกลายเป็นน้ำแข็งย่อมเคาะให้แตกได้ แต่พออยู่ในอุณหภูมิปกติก็จะกลายเป็นของเหลวเคาะยังไงก็ไม่แตก คิดว่าอย่างนั้นนะ
-
ใช้ท่านใช้เวลาลดอุณหถูมิ กว่า 8 ชม.หรือลดลง นาทีละ 0.34 องศา
เอา web japan ที่ทำ cryogenic ของต่าง ๆ มาโชว์ส่วนมากจะทำของที่มีอยู่ให้ดีขึ้นหรือ เพื่อเพิ่มคุณสมบัติด้านเสียง
(http://www.cryo-at.com/image/woods_talk-top.gif)
(http://www.cryo-at.com/image/sc-acp35.jpg)
(http://www.cryo-at.com/image/2851ru-p.jpg)(http://www.cryo-at.com/image/scbd-40as-naka.jpg)
(http://www.cryo-at.com/dengen-kaiyama/image/sha02.jpg)
(http://www.cryo-at.com/image/scbr-20as_ura.jpg)(http://www.cryo-at.com/image/scbr-20as_omote.jpg)
(http://www.cryo-parts.com/images/marincoiec.jpg)
-
คุณ golf ไม่มีอะไรจะแช่หรือท่าน Y]มาลองดูสักชิ้นจะติดใจ
ช่วงนี้หันไปเล่น Model Gundam มากกว่าเครื่องเสียง ... เอาไปแช่น่าจะแปลกๆ อ่ะครับ
:D
(http://img201.imageshack.us/img201/118/p1010676800rs4.jpg)
-
ผมเองก็กำลังสะสม อยู่เหมือนกันท่านGolf
strike freedom ยังต่อไม่เสร็จสีหมดก่อนรอว่างจะทำต่อครับ
(http://www.marvinryan.com/blog/wp-content/uploads/2006/10/mg-strike-freedom-02.jpg)
-
ผมเองก็กำลังสะสม อยู่เหมือนกันท่านGolf
strike freedom ยังต่อไม่เสร็จสีหมดก่อนรอว่างจะทำต่อครับ
น่าส่งประกวดที่ http://www.gundamsite7.com/ นะครับ ... เืผื่อจะได้รางวัลกับเค้าด้วย ... ของผมส่ง Rick Dom Char's เข้าประกวด แบบ non-modify ... ตอนนี้ใกล้เสร็จแล้ว c)
Strike Freedom น่าจะลองเอาไปแช่เข็งดูนะคับ ... หรือเอา Pump สำหรับ Air Brush ไปแช่ดู อาจจะพ่นเนียนขึ้นก็ได้นะ :D
-
ผมก็สะสมโมเดลกันดั้มนะครับ. เมื่อก่อนยังทำสี เดี๋ยวนี้ไม่มีเวลาทำแล้วครับ. พอมีคุณลูกก็ไม่ค่อยได้ซื้อแล้วครับ. (สไตร์คฟรีด้อมก็อยากได้นะครับเนี่ย ไฮนิวกันดั้มก็อยากซื้ออยู่) งานอดิเรกค่อยๆหดหายไปตามเวลาครับ. :'(
-
ผมก็สะสมโมเดลกันดั้มนะครับ. เมื่อก่อนยังทำสี เดี๋ยวนี้ไม่มีเวลาทำแล้วครับ. พอมีคุณลูกก็ไม่ค่อยได้ซื้อแล้วครับ. (สไตร์คฟรีด้อมก็อยากได้นะครับเนี่ย ไฮนิวกันดั้มก็อยากซื้ออยู่) งานอดิเรกค่อยๆหดหายไปตามเวลาครับ. :'(
ผมก็อยากได้ครับ ... ตอนนี้ลุ้น Rick Dom ไปตบรางวัลกับเค้ามาให้อยู่เนี่ย ... ประเภท Out of Box (non-modify) ที่ผมประกวด (พวก modify ไม่มีปัญญาส่ง แต่ละคน เทพลงชัดๆ) ... ชนะเลิศได้ Hi Nu อ่ะครับ :headphone