HTG2.club
Home Theater Guide webboard => มุม โฮมเธียเตอร์ (HT) => ข้อความที่เริ่มโดย: กัมปนาท KK ที่ 09 กรกฎาคม, 2014, 04:52:36 pm
-
สินค้าตัวใหม่นะครับ เปิดตัวราคา 22,900-
(http://image.free.in.th/v/2013/ij/140709045053.jpg) (http://pic.free.in.th/id/94d2a12cc3563f9d71751289dbe8f449)
ADL A1 | Alpha Design Labs A1
DSD (2.8M/ 5.6M) DAC Android DAC USB DAC (24bit/ 192kHz Max.) DDC (Optical input and output 24bit/ 192kHz Max.)
Features
-Supports DSD64 (2.8MHz) and DSD128 (5.6MHz)
-Digital inputs for Android, PCs, Optical (Optical out supports Android digital signal)
-DD Converter (3.5mm TOSLINK optical output)
-High-performance 24-bit/192kHz DAC chip
-supports ASIO and Asynchronous mode
-Low Jitter
-Fits in the palm of your hand
-Enjoy music anywhere, on your desk or on the go
-Doesnt draw power from connected Android Device battery
Front Controls and Indicators:
① Headphone and Analog out-1 (4-pin) : 3.5mm phone jack for headphones output
② 3.5mm Optical input jack: for SPDIF signal 24bit/192kHz Max.
③ Line input (4-pin): 3.5mm phone jack (switched) for analog source input (When 3.5mm Line In jack is used Android digital signal input is deactivated)
④Volume: Rotary-type variable resistor with power on/off
⑤ Charging Indicators: Three colors: RED, GREEN and ORANGE LED RED indicates charging/GREEN indicates full charge/ORANGE indicates low charge
⑥ Line input and Headphone out-1 (4-pin): ADL A1 Headphone Out supports 4pin 3.5mm headphones and earphones with remote and mic when the source is connected to the Line In jack with a 4pin 3.5mm stereo cable adl_x1
Rear Panel:
⑦ USB Mini-B socket: For connection to Windows and MAC music sources via USB Cable and to charge battery (Internal DC3.7V 2600mAh Li-ion Type Rechargeable Battery)
⑧ USB A socket : For connection to Android Device music sources via a USB On-The-Go Cable (USB OTG cable is USB-A to micro-B type)
⑨ Headphone / Analog out-2 (3-pin) or 3.5mm Optical output: Combined 3.5mm phone jack or mini optical output jack for headphone or connection to external amplifiers via mini Optical cable (Optical out supports Android digital signal 16bit/48kHz Max.)
x1-buttom
Top Panel LED Indicator:
DSD Indicator: sample rates will indicate according to the computers sample rate signal 2.8M or 5.6M
USB DAC (digital source - Mac or Windows USB connection): sample rates will indicate according to the computers sample rate settings ( 44.1/ 48/ 88.2/ 96/ 176.4/ 192kHz )
Android Device digital connection: sample rates will indicate at 44.1kHz or 48kHz when connected with USB OTG cable
Android Device analog connection: sample rates will indicate at 44.1kHz (When 3.5mm Line In jack is used Android digital signal input is deactivated)
3.5mm Optical input: If the playback sample rate cannot not be set at source, the 44.1kHz LED will indicate (Max. 24bit/192kHz sampling rates supported)
Playback of computer based files using iTunes on either Mac or PC: sampling rates will indicate according to the computers sample rate settings (44.1/ 48/ 88.2/ 96/ 176.4/ 192kHz)
※Playback of computer based files using iTunes with Windows XP: sampling rates cannot be set, in this case the A1 will indicate at 44.1kHz
Bottom Panel:
Input Selection: Switchable between Android (USB-A input) /Line in, Optical Input and Windows/MAC (USB-miniB input)
※Switch must be reset after each selection, simply switch the ADL A1 on and off