วิธีการ up firmware
DIY Instructions
View the release note below.
Download the firmware from
http://www.oppodigital.com/Download/Firmware_971h-10-0720.iso Burn a CD from the downloaded ISO image file. Be sure to burn the CD as an ISO image file, not a data file. The CD should contain a 935.BIN file if you burned it successfully. Please consult your CD burning software's help/instruction manual for more information on how to do this. Some general instruction for common CD burning software is listed below.
Turn on your TV display and the OPPO player.
Open the player tray and insert the firmware CD, and then close the tray.
As soon as the CD is loaded, you will see "Press Play To Start" on your TV display. Press the PLAY key on the remote or the player once.
The TV display shows "File Copying" and then "UPGRADING"
In about 8 seconds, the CD will be ejected. Remove the CD quickly; DO NOT DO ANYTHING ELSE. What follows is the process when the player will reboot itself.
DO NOT PRESS ANY BUTTONS NOR ATTEMPT TO CLOSE THE TRAY NOR UNPLUG THE POWER DURING THE REMAINING UPGRADE PROCESS.
After approximately 1 - 2 minutes, the player reboots itself and closes the tray automatically to complete the process. The update process is completed when the front panel of the DVD player shows "No Disc".
Eject the disc tray and then press the "OSD" button on the remote control to verify the firmware version.
Congratulations! You have just completed the firmware upgrade.
วิธีการอัฟ รีโมท
If you have the old silver/white remote control (see picture above), after completing the above steps, you need do the following once-only process to make the remote work with the new firmware:
Turn on your DVD player and display device.
Eject any disc that may be inside of the DVD player. Remove the disc and close the tray.
Wait for the display message "No Disc" to appear in the upper left corner of your display device.
Press and hold (hard) the Stop button on the front panel of the DVD unit (NOT THE REMOTE) for 5 seconds. Release.
The new message "Old RC" will appear briefly in the upper left hand corner of your display unit.
วิธีการทำ Region free
There is also a multi region hack on videohelp which is:
Press Setup on remote control to access the setup page
* Enter 9210 on the remote
* A secret menu will pop up
* Select 0 to 6 in region code. 0 is multi region
* Press Setup on remote again to exit
After setting region 0 I've tried region 1 and region 2 discs and both work.
The DVD player will now respond correctly to the silver/white remote control.
ขอให้มีความสุขกับการใช้ OPPO นะครับ
