กรุณาอัพเกรดด้วย upgrade for the VisionDVI, VisionHDP and VisionProHDP
ตัวนี้น่ากลัวครับ
http://www.lumagen.com/update_hdp.htmProduction Release 072605- replaces 072505 release. One more
genlock bug fixed which would give flashing output sometimes with NTSC or PAL sources.
Production Release 072505- Couple more bugfixes for genlock that resulted in dropped frames, especially when using 24/48/72/75 hz output rates. Fix for intermittent line twitter when using a 1080i source and using 1080i output.
� �
Production Release 072405- replaces 072305 another genlocking bug was fixed.
Production Release 072305- replaces 072205 with additional bugfix for genlock feature.
Production Release 072205- replaces 072005 and fixes various bugs with the new genlock feature. Also, for further explanation of genlock <click here>.
Production Release 072005 - Added genlock (source lock) feature. Genlock can be used when you've got matching input and output refresh rates such as NTSC in (which is 59.94hz) and 59.94hz out and serves to avoid dropped or repeated frames on the output. Can also be used for film sources when the output rate is a multiple of the input rate such as output rates of 24Sf, 47.95hz & 71.93hz when using NTSC input or an output rate of 75hz with PAL input (50hz). You must enable genlock under the IN menu (IN->CONFIG->CNTRL->GENLCK). You can check the status of genlock by pressing "ok" several times when no menu is onscreen. There are some situations where it is disabled even when turned on such as if you've got a 50hz source and you're output rate is at 59.94hz. The status will be either off, disabled, locking or locked.
The deint menu was moved under the CNTRL menu. Added a separate copy command for the inputs to copy only color information (under IN->COPY).� Modified color and hue adjustment command such that if you're in service mode and you're executing one of the color/hue adjustment commands the only color displayed is the one being adjusted---saves on having to use those color filters. Enter service mode by pressing
"menu 0910". Bugfix for PC/VIDEO level not adjusting level on DVI input which was in the last few releases but had gone unnoticed. Bugfix for special case of switching between DVI and analog outputs in independent output mode when analog output was compone