B1 buffer ( 2sk170) ที่ออกแบบโดย Nelson Pass
เคยใช้รุ่นกรุ๊ปบายนานแล้วครับ ซื้อต่ออีกทีแบบแห่ตามแฟชั่น และเก็บไม่ได้ใช้งาน
ต่อมามีคนขอซื้อเลยขายไป ยังเสียดายครับ
ผมฟังเพลงจากไฟล์เพลง ผ่าน Mac Mini และฟังจากยูทูบ ง่ายและสะดวกสำหรับคนแก่
ฟังแนวผ่อนคลาย เปิดแล้วเดินออกมาฟังนอกห้องบ้าง แอมป์ก็ ECL82 SE ลำโพงฟูลเร้นจ์ดอกเดียว 8 นิ้ว
ความไว 93 dB แฮปปี้ดี
หลังปีใหม่หยิบโปรเจ๊คที่กรุ๊ปบายทิ้งไว้ คือ ปรีหมีน้อย กับ OTL 60W มาสานต่อจนมีเสียง
เอาเป็นว่าถูกชะตากับสุ้มเสียงเลยอยากปรับปรุงให้ทั้งสองตัวเข้าขากัน
อ่านเจอเรื่องบับเฟอร์ แหมมันช่างท้าทายครับอยากลองและไม่เสียสะตังมากนัก
บังเอิญอ่านเจอ
Cathode followers have a slight decrease in signal level voltage, but the reason cathode followers are used is that they increase the ability of the signal to drive heavier loads. If you have a SS amp with say 10K input impedance, and a source that has an output impedance of 1 megohm, and the signal voltage is 1V, the SS amp will see it as a 10mV signal. You get the effect as if the signal source is feeding a voltage divider resistor network of 1 megohm and 10K to ground, which will produce about 1% of the signal voltage. A cathode follower will reduce the signal's impedance to something that can drive 2/3V to 9/10V signal voltage into the SS amp.
A tube cathode follower can introduce some of that magic "tube flavor" aka 2nd harmonic about 45dB down into the music. The human ear likes a small amount of 2nd H, but really hates 3rd H. But be careful with the 2nd H, music with lots of instruments playing at the same time can make for "intermod", intermodulation distortion coming from the same mechanism that produced the -45dB 2nd H. Intermod makes for "muddy" sound, which is not pleasant.
https://www.diyaudio.com/forums/tubes-valves/96681-tube-buffer-6j1-5654-6ak5-6.htmlอ่านแล้วยังไม่เข้าใจครับ และน่าจะคุยกันถึงตัวนี้ครับ น่าลองสั่งมาเล่นไหม
