ภาคส่ง
The resistances are 1/4W.
R1
10KW
R2
100KW
R3
39W
R4
180W
R5
4,7KW
R6
1MW
R7
3,9KW
C1, C9, C10
100nF polyester
C2
33pF ceramic
C3
470pF ceramic
C4
4,7nF polyester
C5
1nF ceramic
C6
10-60pF trimmer
C7
220nF polyester
C8
10mF/25V electrolytic
C11
47mF/25V electrolytic
C12
1,5nF ceramic
J1, J2, J3
VK200 (inductor of high frequencies).
L1, L2
Wires of coper (smaltwme'na) with diameter 0,4mm wrapped in plastic support of diameter 6-7mm of perjstrofjkoy' core. For the L1 you wrap 13 coils. For the L2 you wrap 4 coils. (As in the receptor CB.)
L3
Wrap 20 coils cupreous wire of (0,3-0,4mm diameter) convolution round a resistance 2,2W/2W of coal.
Q1, Q2
BC108
Q3
BD139
Q4
2N4427 (it is not replaced)
Q5
BD329 (or 2N3553)
Y1, Y2?
Crystal hails. (You can you put the so much, those who also channels that you want you emit). See here.
MIC
microphone with preamplifier.
ANT1
Aerial for CB (For the trials is enough a piece wire of few metres but better connects a regular aerial so that does not have many stagnantly and burns the transmitter).
S1
(Choice of receptor of - transmitter, if you combine the transmitter with the receptor CB, you are supplied the receptor from exit 12V OUT)
S2
Switch of choice of channel. It has so much places, those who also the channels that you want pja'nete.(Kaly'tera he is mechanically connected with the S1 of receptor for simultaneous change of channels).
ภาครับ
The resistances are 1/4W.
R1, R3, R5
100W
R2
56KW
R4
39KW
R6
560W
R7, R11
6,8KW
R8
220W
R9
2,2KW
R10
5,6KW
R12
10KW logarithmic pontesiometer
R13
1KW
R14
10W
C1
150pF ceramic
C2
39pF ceramic
C3, C5
12pF ceramic
C4
56pF ceramic
C6, C7, C8, C9, C10, C11, C16, C21
47nF ceramic
C12, C19
47mF/16V electrolytic
C13, C14
10nF ceramic
C15
100nF polyester
C17
10mF/16V electrolytic
C18
2,2mF/16V electrolytic
C20
470mF/16V electrolytic
D1
AA119, AA117 (germanium diode)
Q1, Q2
BF241 (amplifiers of intermediary frequency)
U1
SO42P (mixed and local oscillator)
U2
LM386 (amplifier A.F.)
Y1, Y2
Crystals hails. (You can you put the so much, those who also channels that you want you touch). See here.
MF1
Medium frequency 455KHz, core yellow. *
MF2
Medium frequency 455KHz, core white. *
MF3
Medium frequency 455KHz, core black. *
L1, L2
Wires of coper (smaltwme'na) with diameter 0,4mm wrapped in plastic support of diameter 6-7mm of perjstrofjkoy' core. For the L1 you wrap 13 coils. For the L2 you wrap 4 coils.
LS1
Loudspeaker 8W/1W.
ANT1
Aerial for CB (For the trials is enough a piece wire of few metres).
S1
Switch of choice of channel. It has so much places, those who also the channels that you want to touch.
